The classic one-cup drip filter brewer, not only does this Japanese invention come in a range of punchy colours, it allows you to brew genuine barista-quality coffee with nothing more than a few pours of the kettle.

Tools Needed test
Brew Time

1.5 - 2.5 minutes

Further Questions?
Ask the Kiss the Hippo Team at
Step 1

Assemble your brewing equipment by placing a cone filter inside the V60 on top of your brewing vessel.

Step 2

Rinse the filter with freshly boiled water (this step eliminates any paper residue and also heats the brewing equipment to minimise heat loss during brewing).

Don't forget to discard your rinse water!  

Step 3

Add 21g of freshly ground coffee to the filter and gently shake it to create a flat bed then tare your scale. 

Step 4

Tare your scale, start timer and pour 40g of water just off the boil. Wet the whole bed of coffee and allow to “bloom”, which releases the gasses, for 30 seconds. As the coffee blooms stir the coffee to saturate all the grounds and ensure there are no dry spots in the bed.

Step 5

After 30 seconds slowly pour all remaining water in a spiral pattern. Once all water is in, stir vigorously for 5 seconds.

Step 6

After 1.5 to 2.5 min, coffee should have finished dripping and you can discard the filter.  

Step 7

Swirl the brew to even out the particles.

Serve immediately and enjoy!